Menampilkan 13–24 dari 52 hasil
-
SP 95 BARE PUMP
Dinilai 0 dari 5Buy via WhatsAppSP ‐ BARE PUMP
SP95‐1 Rp5 6″ 50/60Hz
Suitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
-
SP ACCECORIES KIT (CTK) 3 – CORE
Dinilai 0 dari 5Buy via WhatsAppSP ACCESSORIES – CABLE TERMINATION KIT (CTK) 3 – CORE
For watertight shrink‐joining of motor cable and submersible drop cable (round or
flat cable).
Enables the joining of:
‐ Cables of equal size.
‐ Cables of different size.
‐ Cable leads with single leads.
The joint is ready for use after a few minutes and requires no long hardening
times as do resin joints.
The joint cannot separated. -
SP ACCECORIES KIT (CTK) 4 – CORE
Dinilai 0 dari 5Buy via WhatsAppSP ACCESSORIES – CABLE TERMINATION KIT (CTK) 4 – CORE
Accesories
For watertight shrink‐joining of motor cable and submersible drop cable (round or
flat cable).
Enables the joining of:
‐ Cables of equal size.
‐ Cables of different size.
‐ Cable leads with single leads.
The joint is ready for use after a few minutes and requires no long hardening
times as do resin joints.
The joint cannot sepearated -
SP ACCECORIES KIT (CTK) WITH PLUG
Dinilai 0 dari 5Buy via WhatsAppSP ACCESSORIES – CABLE TERMINATION KIT (CTK) WITH PLUG
For watertight joining of motor cable and submersible drop cable in an acrylic tube
filled with resin. Used for both single‐ and multi‐core cables during installation of
submersible pumps.
Note: Only to be used for MS 402
and MS 400 motor cables with two
motor plugs
24 hours of hardening is required -
SP11
Dinilai 0 dari 5Buy via WhatsAppMEDIUM SP ‐ 1 PHASE
SP11 1 X 230V 50HZ RP2; Q=11m3/hr
Suitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
-
SP11 (3PHASE)
Dinilai 0 dari 5Buy via WhatsAppMEDIUM SP ‐ 3 PHASE ‐ DIRECT‐ON‐LINE (DOL)
SP11 3 X 400V 50HZ RP2; Q=11m3/hrSuitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
-
SP11 BARE PUMP
Dinilai 0 dari 5Buy via WhatsAppSP ‐ BARE PUMP
SP11‐ 3 Rp2 4″ 50/60
Suitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
-
SP125
Dinilai 0 dari 5Buy via WhatsAppLARGE SP ‐ 3 PHASE ‐ DIRECT‐ON‐LINE (DOL)
SP125 3 X 400V 50HZ RP6; Q=125m3/hr
Suitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
-
SP125 S.D
Dinilai 0 dari 5Buy via WhatsAppLARGE SP ‐ 3 PHASE ‐ STAR‐DELTA (S/D)
SP125 3 X 400V 50 HZ RP6; Q=125m3/hr
Suitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
-
SP14
Dinilai 0 dari 5Buy via WhatsAppMEDIUM SP ‐ 1 PHASE
P14 1 X 230V 50HZ RP2; Q=14m3/hr
Suitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
-
SP14 (3PHASE)
Dinilai 0 dari 5Buy via WhatsAppMEDIUM SP ‐ 3 PHASE ‐ DIRECT‐ON‐LINE (DOL)
SP14 3 X 380V 50HZ RP2; Q=14m3/hr
Suitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.
-
SP160
Dinilai 0 dari 5Buy via WhatsAppLARGE SP ‐ 3 PHASE ‐ DIRECT‐ON‐LINE (DOL)
SP160 3 X 400V 50HZ RP6; Q=160m3/hrSuitable for
- Ground water intake
Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4″ over 6″ and 8″ to 10″. The motor sizes for the pumps are available in 0.37-250 kW.