Showing 193–204 of 270 results
-
SZ
Rated 0 out of 5Buy via WhatsAppSZ
( Mixed Flow Volute Pumps ) Bare Pump
Features
- Highly efficient and economical.
Extremely high efficiency rate of 80%. Small drive motor required significantly reduces operating cost.
- Trouble Free Operation.
Semi-open impeller guarantees clog free operation.
- Large Capacity.
Changes in water lever will have little effect on pump capacity. In fact, the higher the water volume, the less horsepower expended.
Perfect for irrigation.
- Simple Disassembly and Assembly.
Impeller can be easily inspected without removing driver.
Simple to disassemble and assemble.
Download here Brochure_SZ
-
TML-B Round 3-Core
Rated 0 out of 5Buy via WhatsAppSP ACCESSORIES – TML-B MOTOR CABLE
(with EPR outer sheat (Ethylene propylene rubber))TML-B Round 3-Core
1. Suitable for these application:
‐ Continous application in groundwater and potable wate (approved for
potable‐water applications).
‐ Connection of electrical equipment, such as submersible motors.
‐ Installation depths up to 600 metres and average loads.
2. Insulation and sheath of special EPR‐based elastomer materials adapted to
applications in water.
3. Maximum permissible water temperature: 70⁰ C.
4. Maximum permissible lead service tempearature: 90⁰ C. -
TML-B Round 4-Core
Rated 0 out of 5Buy via WhatsAppSP ACCESSORIES – TML-B MOTOR CABLE
(with EPR outer sheat (Ethylene propylene rubber))TML-B Round 4-Core
Accecories
1. Suitable for these application:
‐ Continous application in groundwater and potable wate (approved for
potable‐water applications).
‐ Connection of electrical equipment, such as submersible motors.
‐ Installation depths up to 600 metres and average loads.
2. Insulation and sheath of special EPR‐based elastomer materials adapted to
applications in water.
3. Maximum permissible water temperature: 70⁰ C.
4. Maximum permissible lead service tempearature: 90⁰ C -
TORISHIMA CAL/CAR
Rated 0 out of 5Buy via WhatsAppMain application fields are Cooling Water Pump, Hot Water (circulation) Pump, Cold Water Pump, Raw Water Pump, Filtrate Pump, Back Wash Pump, Transfer Pump, Recovering Back Wash Pump, Deaerator Feed Water Pump, Industrial Water Pump, Spray Pump, Sprinkling Pump, Chilled Water Pump.
Technical Data
Total Heads : up to 100 m Capacity : up to 600 m3/hr Size : 32 to 200 mm Temperature : Standard : -10℃ to 100℃ Option : 100℃ to 350℃ -
TP 2 POLE- Complete Set
Rated 0 out of 5Buy via WhatsAppTP 2 POLE- Complete Set
TP 32‐250/2 A‐F‐B‐BQQE‐HX1
-
TP 4 POLE – Complete Set
Rated 0 out of 5Buy via WhatsAppTP 4 POLE – Complete Set
TP 32‐100/4 A‐F‐B‐BQQE‐DX3
Suitable for
- Commercial air conditioning
- Commercial heating
- Commercial hot water recirculation
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Water distribution
-
TPE/TPE3D – In-Line Pump (DN 100)
Rated 0 out of 5Buy via WhatsAppTPE/TPE3D – In-Line Pump
TPE 100‐40‐S
DN 100
Suitable for
- Commercial air conditioning
- Commercial heating
- Commercial hot water recirculation
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Water distribution
-
TPE/TPE3D – In-Line Pump (DN 32)
Rated 0 out of 5Buy via WhatsAppTPE/TPE3D – In-Line Pump
TPE 32‐80‐S
Suitable for
- Commercial air conditioning
- Commercial heating
- Commercial hot water recirculation
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Water distribution
-
TPE/TPE3D – In-Line Pump (DN 40)
Rated 0 out of 5Buy via WhatsAppTPE/TPE3D – In-Line Pump
TPE 40‐80‐S
DN 40
Suitable for
- Commercial air conditioning
- Commercial heating
- Commercial hot water recirculation
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Water distribution
-
TPE/TPE3D – In-Line Pump (DN 50)
Rated 0 out of 5Buy via WhatsAppTPE/TPE3D – In-Line Pump
TPE 50‐60‐S
DN 50
Suitable for
- Commercial air conditioning
- Commercial heating
- Commercial hot water recirculation
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Water distribution
-
TPE/TPE3D – In-Line Pump (DN 65)
Rated 0 out of 5Buy via WhatsAppTPE/TPE3D – In-Line Pump
TPE 65‐60‐S
DN 65
Suitable for
- Commercial air conditioning
- Commercial heating
- Commercial hot water recirculation
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Water distribution
-
TPE/TPE3D – In-Line Pump (DN 80)
Rated 0 out of 5Buy via WhatsAppTPE/TPE3D – In-Line Pump
DN 80
TPE 80‐40‐S
Suitable for
- Commercial air conditioning
- Commercial heating
- Commercial hot water recirculation
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Water distribution