HYDRO MULTI‐E CRE
Hydro Multi‐E 2 CRE 20‐1 U8 A‐A‐I‐DU
GRUNDFOS Hydro Multi-E booster sets are designed for the transfer and pressure boosting of clean water in waterworks, blocks of flats, hotels, industry, hospitals, schools, etc. GRUNDFOS Hydro Multi-E booster sets consists of 2 to 3 CR(N)E pumps coupled in parallel and mounted on a common base frame provided with all the necessary fittings.
Hydro Multi-E is mounted on a common base frame made in black painted mild steel. On the suction side are fitted a suction manifold ( AISI 316 or EN 1.4571) and two pressure transmitters which are mounted on an isolating valve. On the discharge side of the pumps are fitted a non-return valve, an isolating valve, a pressure gauge, two pressure transmitters mounted on an isolating valve, a diaphragm tank and a stainless steel discharge manifold (AISI 316 or EN 1.4571). The Hydro Multi-E is fitted with an on/off-switch for the supply voltage.
The Hydro Multi-E is designed for maintaining a constant pressure regardless of flow changes and fluctuation.
The internal PI-controller regulates the number of running pumps and the speed of the pumps according to the required flow.
The system can be operated directly on the graphical display of any of the pumps or via Grundfos GO (available as accessory)
Besides the system features:
2 Relay outputs 2 Digital inputs (one used for external start/stop) 2 Digital configurable input/output (one used for external start/stop) 3 analogue inputs (one used for discharge pressure and one used for inlet pressure) Multi-Master functionality 2 Limit exceed functions (one used for dry running protection) Set-point influence Pipe filling function Proportional pressure and High Efficient PM motors
Available communication protocols:
LON PROFIBUS DP PROFIBUS IO BACnet MS/TP BACnet IP Modbus RTU Modbus TCP Ethernet IP Cellular 3G/4G GiC/GRM
When delivered, the GRUNDFOS Hydro Multi-E booster set is factory tested and ready for operation
“FOR MORE INFORMATION AND ORDER CONTACT US”