Deskripsi
UNILIFT AP SERIES ‐ 3 PHASE
UNILIFT AP50
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 3-phase totally enclosed motor in insulation class F. The pump is fitted with a suction strainer.
The pump is supplied with a control box including motor starter, a motor protection and a float switch for automatic start/stop of the pump . The float switch contains 10 m cable. And there is a 0.8m maine cable connected to the box (see electrical data for optional CEE plug).
The impeller is a VORTEX impeller for groundwater, surface water, rain water and similar liquids.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
Type :
1.Unilift AP50.50.08.3.V
2.Unilift AP50.50.08.A3.V
3.Unilift AP50.50.11.3.V
4.Unilift AP50.50.11.A3.V
“FOR MORE INFORMATION AND ORDER CONTACT US”
